Compa-II Label Printer

The Compa-II series includes 4-inch and 6-inch wide models with 200 and 300dpi resolution (300 dpi as standard for 6-inch models). The optional APL-100 applicator kit can be added to convert a Compa-II printer into a print-and-apply stsrem. Stand-alone printing is possible by adding a USB keyboard and memory card. RFID 'smart' labels or tags can be encoded with the optional RFID module.
As standard, USB, serial, Ethernet LAN and parallel interfaces are included. Wireless LAN is available as an option. Two USB ports are provided for stand-alone printing or to provide additional memory.
> |
Internal and external rewinders |
> |
Dispenser with backing paper rewinder |
> |
Cutter |
> |
I/O for interfacing with external devices |
> |
RFID encoder |
> |
External unwinder for high-capacity printing |
> |
Wireless LAN interface |
Supplied with a free copy of LabelStar Office LITE for simple label printing applications. This may be upgraded to LabelStar Office Basic or Professional. In addition, the NiceLabel 2017 software range can also be used or instructions sent to the printer using the printer interface language.
Print width: |
104, 106, 108 and 162mm models |
Media width: |
12 to 116mm (4-inch models); 50 to 176mm (6-inch models) |
Print resolution: |
200, 300dpi (4-inch models); 300dpi (6-incl models) |
Max. print speed: |
200mm/sec (4-inch models); 150mm/sec (6-inch models) |
Max. label length: |
Up to 6,000mm depending on model |
Min label length: |
5mm (25mm with dispenser or cutter) - 6mm minimum for 6-inch models |
Max. media weight: |
220g / sq.m (higher optionally) |
Max. label roll size: |
200mm internally (300mm with optional unwinder) |
Label core size: |
40 to 76mm |
Label winding: |
Inside or outside |
Label sensor: |
Gap (transmission) and black back mark |
Max. ribbon length: |
300m / 80mm diameter |
Ribbon winding: |
Outside or inside |
Ribbon core: |
25.4mm (1") |
Max. ribbon width: |
110mm (4-inch models); 170mm (6-inch models) |
Interfaces: |
USB, serial, Ethernet LAN and parallel (wireless LAN optional) |
Options: |
Internal and external rewinders, dispensers, cutters, I/O module, RFID encoder, |
stand-alone kit, APL-100 applicator unit for print-and-apply oprtation. |
|
Dimensions (WxLxH): |
242 x 446mm x 274mm (4-inch models); 242 x 302 x 274mm (6-inch models) |
Electrical supply: |
220-240Vac @ 50-60Hz (110V optional) |
Environmental: |
+5 to +35C at up to 80% humidity (non-condensing) |
. |
There are currently no videos available for this product.