RN Mark OrdioX High-Resolution Inkjet Printers

Home > Product Coding > RN Mark OrdioX

RN Mark OrdioX high-resolution inkjet printers offer a low cost solution for printing text, graphics, barcodes and 2D codes onto porous and non-porous surfaces including card, paper, plastic, metal, glass and coated carton. Print messages are created on a PC using RN Soft software and transferred to the OrdioX printer for stand-alone printing.

  • OrdioX N-100
  • OrdioX R-100
  • Porous and non-porous inks

Low-cost high-reolution printers

OrdioX printers have been designed to provide a low-cost solution for high-resolution printing with 18 and 53mm high printheads. OrdioX printers are based on the RN Jet range but operate in stand-alone mode without the touch-screen controller used in the RN Jet range. Print messages are created on a PC running RN Soft software and transferred to the OrdioX printer by memory stick. Porous and non-porous products can be printed with text from 2 to 53mm high, graphics, barcodes and 2D codes.


OrdioX N-100 18mm printhead - side printing only
OrdioX N-300 53mm printhead - side printing only
OrdioX R-100 18mm printhead - omni-directional - print in any direction


No-compromise printing

Despite their low cost, OrdioX printers can print text in any font and point size, graphics, barcodes and 2D codes. In addition, the full range of RN Mark inks can be used including oil-based for porous surfaces, solvent-based for non-porous surfaces and food-grade for direct food contact. Real time data including date, time, offset date and counters can all be printed.

Simplicity by design

Setting up an OrdioX printer could not be simpler... Create a print message using RN Soft PC-based software, save the message to a USB memory stick, transfer the stick to the printer and switch on. Simple controls on the printer allow the print speed and delay (print position) to be adjusted.

Print height:
18 and 53mm models
Print resolution:
180dpi vertical x 180 to 540dpi horizontal
Printing speed:
Up to 60m/min
Distance to product:
Up to 7mm for optimum print results
Any TrueType font and point size from 2 to 53mm depending on printhead
Barcodes & 2D codes:
All common 1D and 2D symbologies included
Printhead position:
N-100 and N-300 side printing only; R-100 omni-directional
Variable fields:
Counters, dates, times, offset dates
Ink type:
Oil-based for porous surfaces and solvent-based for non-porous surfaces
Oil-based inks:
Black, red, blue
Solvent-based inks:
Black, red, blue, yellow, white, green, brown, orange, food-grade red
Ink container:
110ml quick-change cartridge
RN Soft PC-based
USB and RS232 Serial
Print controls:
Potentiometer controls for delay and printing speed
Encoder, specialist sensors, custom bracketry and protection, conveyors
Electrical supply:
120 - 240Vac @ 50 - 60Hz; 3.3A maximum
0 to +45 degrees C @ up to 85% humidity (non condensing)


  • OrdioX N-300
  • OrdioX N-100
  • OrdioX R-100
  • 53mm print on carton
  • 18mm print on can
  • Poly-woven sack
  • 18mm print on carton
  • Small character print on metal lid
  • 110ml quick-change ink cartridge

There are no videos currently available for this product.








More Information


+44 (0)1543 502202
Send Enquiry