Low-cost high-reolution printers
OrdioX printers have been designed to provide a low-cost solution for high-resolution printing with 18 and 53mm high printheads. OrdioX printers are based on the RN Jet range but operate in stand-alone mode without the touch-screen controller used in the RN Jet range. Print messages are created on a PC running RN Soft software and transferred to the OrdioX printer by memory stick. Porous and non-porous products can be printed with text from 2 to 53mm high, graphics, barcodes and 2D codes.
||18mm printhead - side printing only
||53mm printhead - side printing only
||18mm printhead - omni-directional - print in any direction
Despite their low cost, OrdioX printers can print text in any font and point size, graphics, barcodes and 2D codes. In addition, the full range of RN Mark inks can be used including oil-based for porous surfaces, solvent-based for non-porous surfaces and food-grade for direct food contact. Real time data including date, time, offset date and counters can all be printed.
Simplicity by design
Setting up an OrdioX printer could not be simpler... Create a print message using RN Soft PC-based software, save the message to a USB memory stick, transfer the stick to the printer and switch on. Simple controls on the printer allow the print speed and delay (print position) to be adjusted.