Valentin Dynacode-IP Thermal Transfer Coder

Home > Valentin Thermal Transfer Coders > Dynacode-IP

The Dynacode-IP series has been specifically designed to operate in harsh industrial environments and offers excellent protection against water and dust. The stainless steel contoller has an industrial membrane keypad and industrial cable connectors. The print unit has an optional cleaning cassette that replaces the ribbon cassette and seals the print unit during cleaning processes.

  • Dynacode IP print unit
  • Dynacode IP controller
  • Industrial cable connectors
  • Suitable for wash-down environments

Industrial design

Many industrial environments pose problems to printing machinery including wash-down, wet and dusty environments. The Dynacode-IP series has been designed for use in exactly these environments. Built on the successful Dynacode platform, the IP series has a controller with harsh-environment connectors, stailness steel case and membrane keypad. The print unit has a cleaning cassette to seal the unit during cleaning processes.


As standard, USB, Ethernet, and serial interfaces are included. Stand-alone operation is available using a memory card and the keypad on the controller.

High-throughput printing

With a maximum ribbon length of 900m and a maximum print speed of 800mm/sec, Dynacode-IP printers are well equipped for printing in high-volume environments. For very high volume applications, a spare ribbon cassette can be pre-loaded for changing in seconds.

Ribbon saving

All Valentin thermal transfer coders have ribbon saving as standard with typically 1mm utilisation between prints.


Supplied with Labelstar Office LITE as standard for simple printing tasks. For more advanced requirements, Labelstar Office Basic, Labelstar Office Professional and the NiceLabel 2017 software range are also available.

Print width:
53, 107 and 128mm models
Max. print length intermittent:
Max. print length continuous:
6000mm (53mm wide models); 3000mm (other models)
300dpi (12 dots/mm)
Print speed intermittent:
50 to 600mm/sec
Print speed continuous:
Up to 800mm/sec depending on model
Back speed (intermittent):
Text printing:
Any font and point size
Barcode printing:
All common barcode formats supported
2D code printing:
All common 2D and stacked code formats supported
USB, Ethernet, serial and parallel
Ribbon size:
Up to 900m (98mm diameter) on 1-inch core depending on model
Ribbon winding:
Outside (inside optional)
Dimensions (53mm models):
204 x 182 x 235mm; 9.5Kg
Dimensions (107mm models):
204 x 182 x 290mm; 11Kg
Dimensions (128mm models):
204 x 180 x 310mm; 11.7Kg
Dimensions (controller):
251 x 96 x 207mm; 5.5Kg
Standard cable length:
Electrical supply:
110-240Vac @ 50-60Hz
+5 to +40C at up to 80% humidity (non-condensing)
Air supply:
6 Bar min. oil and water-free
Labelstar Office LITE included. Other software available for advanced needs.


  • Dynacode-IP print unit
  • Dynacode-IP controller
  • Ribbon cassette
  • Cleaning cassette
  • Cleaning cassette
  • Industrial connectors
  • Dynacode-IP on packaging machine
  • Flexible packaging films
  • Flexible packaging films
  • Flexible packaging films
  • Flexible packaging films

There are currently no videos available for this product.







More Information

Dynacode - standard coder series
Dynacode-II - advanced coder series
Flexicode - low cost small area coder
DPM-IIIxi - intermittent coders

+44 (0)1543 502202
Send Enquiry