Valentin Dynacode Thermal Transfer Coder

Home > Valentin Thermal Transfer Coders > Dynacode

Standard thermal transfer coder series for printing onto many flat materials including flexible packaging and flat cartons. A choice of 53, 107 and 128mm wide models is available in continuous and intermittnet models and in right or left-hand configuration. All models will print text in any point size and font, barcodes, 2D codes and detailed graphics at 300dpi resolution.

  • Dynacode with intermittent bracket
  • Simple ribbon loading
  • Flexible packaging films

Comprehensive range

A choice of 53, 107 and 128mm wide models is available in both intermittent and continuous versions. In addition right and left-hand models are available to allow installation on most packaging machines. Standard bracket kits are provided in a choice of web widths with easy cross-web position adjustment.


As standard, USB, Ethernet, serial and parallel interfaces are included. Stand-alone operation is available using a memory card and the control box keypad.

High-throughput printing

With a maximum ribbon length of 900m and a maximum print speed of 800mm/sec, Dynacode printers are well equipped for printing in high-volume environments. A ribbon-remaining indicator is provided so ribbon changes can be planned, and for very high volume applications, a spare ribbon cassette can be pre-loaded for changing in seconds.

Ribbon saving

All Valentin thermal transfer coders have ribbon saving as standard with typically 1mm utilisation between prints.


Supplied with Labelstar Office LITE as standard for simple printing tasks. For more advanced requirements, Labelstar Office Basic, Labelstar Office Professional and the NiceLabel 2017 software range are also available.

Print width:
53, 107 and 128mm models
Max. print length intermittent:
Max. print length continuous:
6000mm (53mm wide models); 3000mm (other models)
300dpi (12 dots/mm)
Print speed intermittent:
50 to 600mm/sec
Print speed continuous:
Up to 800mm/sec depending on model
Back speed (intermittent):
Text printing:
Any font and point size
Barcode printing:
All common barcode formats supported
2D code printing:
All common 2D and stacked code formats supported
USB, Ethernet, serial and parallel
Ribbon size:
Up to 900m (98mm diameter) on 1-inch core depending on model
Ribbon winding:
Outside (inside optional)
Dimensions (53mm models):
204 x 180 x 234mm; 9.5Kg
Dimensions (107mm models):
204 x 180 x 290mm; 11Kg
Dimensions (128mm models):
204 x 180 x 312mm; 11.7Kg
Dimensions (controller):
240 x 125 x 332mm; 5.5Kg
Standard cable length:
Electrical supply:
110-240Vac @ 50-60Hz
+5 to +40C at up to 80% humidity (non-condensing)
Air supply:
6 Bar min. oil and water-free
Labelstar Office LITE included. Other software available for advanced needs.

  • Dynacode system
  • Control unit
  • 53, 107 and 128mm wide systems
  • Intermittent bracket
  • Quick-load cassette
  • Wide range of interfaces
  • Intermittent bracket
  • Continuous bracket
  • Continuous bracket
  • Examples of brackets
  • Packaging films
  • Packaging films
  • Packaging films
  • Packaging films

There are currently no videos available for this product.










More Information

Dynacode-II - advanced coders
Dynacode-IP - for harsh environments
Flexicode - low cost small area coder
DPM-IIIxi - intermittent coders

+44 (0)1543 502202
Send Enquiry