Collamat S-Series
High-performance, modular label applicators
Models for labels up to 100, 180 and 250mm wide
Models with dispense speeds up to 50, 100 and 300m/min
Die-cast aluminium chassis - high strength, lightweight contruction
Digital control panel with 99 memory positions for different product settings
High capacity 350mm label rolls - 410mm optional
Two applicators can operate in non-stop mode - when one labeller runs out of labels or the web breaks, the other automatically starts
Two applicators can operate in tandem mode labelling alternate products on extremely high throughput lines
Advanced interfacing options
Print-and-apply operation using a range of thermal transfer print engines, coders and inkjet printers
Call us on 01543 502202 to discuss your requirements
Specification
| S50 | S100 | S300 | |
| Dispense speed: | 3 to 50m/min | 3 to 100m/min | 3 to 300m/min |
| Max. label width: | 100, 180 and 250mm wide models | 100, 180 and 250mm wide models | 95mm |
| Min. label length: | 10mm | 10mm | 25mm |
| Accuracy: | Up to +/-0.5mm | Up to +/-0.5mm | TBC |
| Controls: | Digital control panel | Digital control panel | Digital control panel |
| Memory: | 99 product settings | 99 product settings | 99 product settings |
| Max. label roll OD: | 350mm (410mm optional) | 350mm (410mm optional) | 410mm optional |
| Non-stop mode: | Optional | Optional | Optional |
| Tandem mode: | Optional | Optional | Optional |
| Options: | Side labelling kit, print unit, encoder, clear label sensor, non-stop mode, tandem mode | Side labelling kit, print unit, encoder, clear label sensor, non-stop mode, tandem mode | Air-loop unwinder, encoder, non-stop mode, tandem mode |
| Electrial: | 110/240Vac @ 50-60Hz | 110/240Vac @ 50-60Hz | 110/240Vac @ 50-60Hz |
flexible modular design
Due to their modular design, all Collamat S-Series label applicators can be fitted with a range of different print options to allow print-and-apply operation. Whether you want to print the entire label or just overprint a batch code and expiry date, Martek can offer a choice of print options.
Valentin and SATO print engines can print entire labels in thermal transfer or direct thermal mode at 200, 300 or 600dpi resolution. Using Martek's inline accumulator, labels can be printed at a lower speed than the application speed to optimise print quality on high-speed production lines. Valentin thermal transfer coders and our EBS, UBS and REINER inkjet printers can also be fitted to overprint a small area of variable onto labels.
Printers can be retro-fitted should your requirements change.
